Datapath Vision Manuale Utente

User ManualVersion 01.02.0The Vision Range of Video Capture Cards

Installing the Capture CardYou are likely to need a at blade and a Phillips head screwdriver for the installation of the capture card; it would be us

Installing Multiple CardsMultiple cards can be installed in a system providing a large number of capture channels. Combinations of Vision capture car

Firmware Upgrades The VisionRGB-E1/E1S cards allow rmware upgrades to be completed on site rather than returning the card to Datapath. Whenever a r

Application OverviewThe application displays the input source in a window; it has the following features:• Scales the data to t in the window• Abil

Notes:12

Chapter 4FCC Compliance VisionRGB-E2Federal Communications Commission StatementThis device complies with FCC Rules Part 15. Operation is subject to t

DECLARATION OF CONFORMITYPer FCC Part 2 Section 2. 1077(a)Responsible Party Name:Datapath LimitedAddress:Alfreton Road, DerbyPhone:+441332-294441Here

Introduction – VisionRGB-E2/E2SThe VisionRGB-E2/E2S, a dual channel PCIe capture card can capture:• Component HD up to 1080P at 60 frames per second

Specication - VisionRGB-E2/E2SBoard Format PCIe half size plug-in card, 110mm x 170mmPCIe bus master with scatter gather DMA providing maximum data r

UnpackingYour packing box contains the following items:• The VisionRGB-E2/E2S• 2 x DVI/VGA, 1 x DVI/Component and 1 x DVI/HDMI Adapter• Installati

ContentsChapter 1 Safety Instructions 1Chapter 2 Introduction 2Chapter 3 VisionRGB-E1/E1S 3Chapter 4 VisionRGB-E2/E2

ConnectionsThe VisionRGB-E2/E2S card has two DVI-I type connectors for two separate, simultaneous inputs. The top connector is referred to as Channe

DirectShowIf you change the link ordering after installation you must run dplinks.exe. This program will update the existing input names used by the

Also available on the Datapath CD:• The Release Notes - The release notes contain the latest information on the VisionRGB-E2/E2S Installation ins

Using the card with other Datapath productsThe VisionRGB-E2/E2S captures the HD/HDMI/analog RGB/DVI data and stores it in an on-board video buer. Th

Chapter 5FCC Compliance VisionRGB-X2Federal Communications Commission StatementThis device complies with FCC Rules Part 15. Operation is subject to t

DECLARATION OF CONFORMITYPer FCC Part 2 Section 2. 1077(a)Responsible Party Name:Datapath LimitedAddress:Alfreton Road, DerbyPhone:+441332-294441Here

Introduction - VisionRGB-X2The VisionRGB-X2, a dual channel PCI-X capture card can capture:• Component HD up to 1080P at 60 frames per second • HDMI

Specication - VisionRGB-X2Board Format 64 bit, up to 66MHz PCI-X, half size plug-in card 105mm x 170mm.PCI bus master with scatter gather DMA providi

UnpackingYour packing box contains the following items:• The VisionRGB-X2 • 2 x DVI/VGA, 1 x DVI/Component and 1 x DVI/HDMI Adapter• Installation

ConnectionsThe VisionRGB-X2 has two DVI-I type connectors for two separate, simultaneous inputs. The top connector is referred to as Channel 1, the

Chapter 1Safety Instructions1Safety Instructions (UK)To prevent damage to your Datapath product or injury to personnel operating the equipment, please

Installing Multiple CardsMultiple cards can be installed in a system providing a large number of capture channels. Combinations of Vision capture car

Firmware Upgrades The VisionRGB-X2 card allows rmware upgrades to be completed on site rather than returning the card to Datapath. Whenever a rmwar

Software InstallationThe Vision software (driver and application) is installed by inserting the CD that was shipped with your card into your CD ROM dr

Note:The supplied drivers and software require that you are using:• Windows® XP, Windows® Vista, Windows® Server 2003, Windows® Server 2008 or Window

Chapter 6FCC Compliance VisionSD8Federal Communications Commission StatementThis device complies with FCC Rules Part 15. Operation is subject to the

DECLARATION OF CONFORMITYPer FCC Part 2 Section 2. 1077(a)Responsible Party Name:Datapath LimitedAddress:Alfreton Road, DerbyPhone:+441332-294441Here

Introduction – VisionSD8The VisionSD8 is an eight channel PCI express video capture card. The card supports PAL, NTSC and SECAM in both composite and

Specication - VisionSD8Board Format 4 lane PCI express 110x170mm (approx)Connectors Two 26 Way D ConnectorsMaximum Capture Resolution 8x 720x576x16bi

Installing the VisionSD8 Capture CardYou are likely to need a at blade and a Phillips head screwdriver for the installation of the capture card; it w

Video PassthroughBy connecting a second BNC16 Input Cable (available from Datapath) to the second VisionSD8 connector it is possible to daisy-chain t

Chapter 2IntroductionThe Datapath Vision range of video capture cards capture HD, HDMI, VGA/ RGB or DVI video sources in real time enabling you to vie

DirectShowIf you change the link ordering after installation you must run dplinks.exe. This program will update the existing input names used by the

Application OverviewThe application displays the video source in a window; it has the following features:• Scales the video data to t in the window•

Chapter 7FCC Compliance VisionSD4+1Federal Communications Commission StatementThis device complies with FCC Rules Part 15. Operation is subject to th

DECLARATION OF CONFORMITYPer FCC Part 2 Section 2. 1077(a)Responsible Party Name:Datapath LimitedAddress:Alfreton Road, DerbyPhone:+441332-294441Here

Introduction – VisionSD4+1/SD4+1SThe VisionSD4+1/SD4+1S is an ideal solution for applications that require the capture of up to four SD video sources

• High quality down scaling• Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8 video formats• High performance DMA to system memory or direct to gr

SpecicationBoard Format PCI-e x4 plug-in card, 110mm x 204mm. PCI-e bus master with scatter gather DMA providing maximum data rate of 480MB/s for the

UnpackingYour packing box contains the following items:• VisionSD4+1 or VisionSD4+1S• SD4-Cable • 1 x DVI/VGA, 1 x DVI/Component and 1 x DVI/HDMI

Installing the VisionSD4+1/SD4+1S Capture CardYou are likely to need a at blade and a Phillips head screwdriver for the installation of the capture c

D-Type ConnectorConnect SD inputs using the 4-way splitter cable (provided). The splitter cable consists of 4 RCA sockets numbered S1-S4, connected t

Chapter 3FCC Compliance VisionRGB-E1Federal Communications Commission StatementThis device complies with FCC Rules Part 15. Operation is subject to t

Installing Multiple CardsMultiple cards can be installed in a system providing a large number of capture channels. Combinations of Vision capture car

It should be noted that the driver installation program includes an automatic rmware update, if required. Therefore, prior to installing the applica

Chapter 8VisionSDI2The Datapath VisionSDI2 is a dual channel PCI express HD-SDI video capture card. The card supports SD-SDI, HD-SDI and 3G-SDI. The

Hardware Overview• Dual Channel PCI express HD-SDI capture card• Four lane PCIe bus with maximum data rate of 650MB/sec• Support for all SD and HD

Specication Board Format PCI-e half size plug-in card, 110mm x 170mmPCI-e bus master with scatter gather DMA providing maximum data rate of 650MB/sC

UnpackingYour packing box should contain the following items:• The VisionSDI2• Installation CD ROMIf there are any discrepancies, you should contact

ConnectionsThe VisionSDI2 card has four BNC type connectors for two separate, simultaneous inputs and two Loop Through outputs. The connectors are ide

Installing Multiple CardsMultiple cards can be installed in a system providing a large number capture channels. Combinations of Vision capture cards i

DirectShowIf you change the link ordering after installation you must run dplinks.exe. This program will update the existing input names used by the

Also available on the Datapath CD:• The Release Notes - The release notes contain the latest information on the VisionSDI2• Installation instructi

DECLARATION OF CONFORMITYPer FCC Part 2 Section 2. 1077(a)Responsible Party Name:Datapath LimitedAddress:Alfreton Road, DerbyPhone:+441332-294441Here

Using the card with other Datapath productsThe VisionSDI2 captures data and stores it in an on-board video buer. This data is then copied using DMA

Chapter 9VisionDVI-DLThe VisionDVI-DL is a single channel PCI express Dual-Link DVI video capture card. A stand alone PCIe x4 plug in card, the Vision

Specication - VisionDVI-DLBoard Format PCI-e x4 card, 110mm x 170mm. PCI-e bus master with scatter gather DMA providing a maximum data rate of 650MB/

UnpackingYour packing box contains the following items:• The VisionDVI-DL capture card• Installation CD-ROM (for latest drivers go to www.datapath.c

ConnectionsThe VisionDVI-DL has one DVI Dual-Link connector.The card is connected to the source using a DVI Dual-Link Cable (not supplied). Installin

Firmware UpgradesThe VisionDVI-DL card allows rmware upgrades to be completed on site rather than returning the card to Datapath. Whenever a rmware

Application OverviewThe application displays the source in a window; it has the following features:• Scales the data to t in the window• Ability to

Chapter 10Datapath LimitedDatapath has a long and very successful history in the computer graphics industry. Datapath has been designing and supplyin

Copyright Statement© Datapath Ltd., England, 2011 Datapath Limited claims copyright on this documentation. No part of this documentation may be repr

IndexAApplicationOverview11, 64Ccable1Connections-VisionRGB-E2/E2S18, 54Connections-VisionRGB-X227CopyrightStatement65DDatapathLimite

Introduction - VisionRGB-E1/ E1SThe VisionRGB-E1/E1S a single channel PCIe capture card can capture:• Component HD up to 1080P at 60 frames per secon

SSDK2Specication-VisionRGB-E1/E1S6Specication-VisionRGB-E2/E2S16, 52Specication-VisionRGB-X225Specication-VisionSD4+144Specica

Specication - VisionRGB-E1/ VisionRGB-E1SBoard Format PCIe x4 low prole card, 68.mm x 167.6mmPCIe bus master with scatter gather DMA providing maxim

UnpackingYour packing box contains the following items:• The VisionRGB-E1 or VisionRGB-E1S data capture card.• 1 x DVI/VGA, 1 x DVI/Component and 1